You will need:

What is the orange dot on iOS 14? Just as the green dot indicates that your camera is being used, the orange one indicates that the app is using the microphone on your iOS device. So anytime you see the appearance of the orange dot, keep in mind that the app you’re on is using your microphone. What is the red dot on iOS 14? Scroll down and tap the “+” button before the NFC Tag Reader to add it to Control Center. How to Use NFC Tag Reader in iOS 14 on iPhone. Once it is added, quit the settings app and open the Control Center. Tap on the NFC Tag Reader button to access it. Then, hold your iPhone near a valid NFC tag to scan the content. App Clips is another significant feature of iOS 14, which eases up the usage of NFC Tag Reader.

Mar 14, 2012 When a reader gets close enough to a tag, it energizes it and transfer data from that tag. You can read more about magnetic induction in How Wireless Power Works. As of this writing, there are five flavors of NFC tags, types 1 through type 5, all featuring different capacities, data transfer speeds and read/write capabilities. Scroll until you see NFC Tag Reader. Tap the Remove button (red circle with a minus sign) to the left of NFC Tag Reader and then tap Remove. Again, this may not work for all users, but you may want to give it a try before doing a factory reset. Turn on Flashlight from the Control Center (swipe down from upper-right corner of your.

  • Blank NFC tags
  • NFC writing app (NXP Tagwriter)

Apple’s rollout of NFC functionality on the iPhone has traditionally been conservative. With a focus on user-facing features like Apple Pay, iPhones couldn’t scan NFC tags until iPhone 7, and even then users needed to install a 3rd party app to use it. Since that time Apple has slowly been adding NFC functionality to its latest devices.

Beginning with iOS 13 and continuing through iOS 14, Apple has taken a major step forward by introducing the ability for iPhone 7 and newer to write NFC tags. Writing NFC tags is useful because NFC tags store short strings of information, like a URL, that can then be read and opened by the device—often a phone—scanning the tag.

For more information see our iPhone NFC Compatibility breakdown.

How to Write an NFC tag with iPhone

Note: only iPhone 7 and newer will be able to write NFC tags.


1 - Get NFC Tags

You will need blank NFC tags before you can start writing information to them. Double check to make sure they are blank and not locked, as you can never re-write an NFC tag once it has been write locked. For more information, see our article on the technical details of NFC chips.

2 - Install an NFC Tag Writing App

We recommend 'TagWriter' by NXP and will be using it for this guide.

3 - Write the Tag

Once NXP TagWriter is installed launch the app and click 'New' at the bottom right of the screen:

You will be presented with a few different options of what to write to your tags. Select the 'Link' option to enter a URL.

Make sure to select either http:// or https:// as the URI type and then enter your domain under the URI Data field.

Note: Do NOT put anything in the 'Description' field. Adding a description will cause the tag to be unreadable for iOS devices.

Finally, click “Save & Write” and tap the top of your iPhone to a blank NFC tag as if you were going to read it. This writes the URL to the NFC tag.

Congratulations, you’ve just encoded your first NFC tag!

Looking to build NFC experiences without code? Here at Blue Bite we power the most innovative brands embedded experiences.

Unlike Android phones, which have been able to read NFC tags 'out of the box' without any additional Apps for many years, Apple's iPhone has had a slower start.

How much support your iPhone will have for reading, and now writing, NFC tags will depend on your iPhone model and your operating system.

It's worth mentioning that Apple have changed NFC tags scanning and writing support with each release of iOS and each new generation of iPhones. It's possible that future releases may change the status again. However, as of September 2020, this is the current status.

How to reading NFC Tags with an iPhone Xs, Xr, 11, 11 Pro, 12 or 12 Pro

The iPhone Xs and Xr were the first iPhones with 'background tag scanning' native support for reading NFC tags. The 11, 11 Pro, 12 and 12 Pro continue this functionality. This means that these phones can scan NFC tags immediately, without any additional Apps.

The iPhone must be running iOS11 or later and the NFC tag must be pre-encoded with a web link. If the NFC tag is not encoded, the phone will not respond at all. No further App is required.

As of iOS13, these phones can also write to NFC tags with an appropriate App.

How to read NFC Tags with an iPhone 7, 8 or X

Reading NFC tags with the iPhone 7, 8 or X will depend on your version of operating system as follows :

iOS 14 : If you have the latest iOS 14 operating system, you can read NFC tags natively with the built-in reader. Just turn on NFC Scan mode from Control Centre and hold the top edge of the phone over the tag. Watch the video here to show you how to read NFC tags with iOS 14.

iOS 13 : With iOS13 or earlier, the 7, 8 and X iPhones cannot read NFC Tags natively. This means that while these generations of iPhones can read NFC tags, they can't do it out of the box. An additional App is required.

Which iPhone App is the best for reading NFC tags on iOS 13 or earlier ?

Seritag recommend NXP's TagInfo or NXP's NFC Launch apps. TagInfo is a more full featured whereas NFC Launch is a lightweight app designed simply for reading a web link from an NFC tag.

Nfc On Iphone

Since Apple announced that NFC tag scanning was going to be enabled in iOS11, a number of NFC Apps have appeared on the App Store. Some of them work very well, others are a little unreliable. Remember, if you are running the latest iOS 14 software, you don't need to download an App, just open the Control Centre and turn on NFC Scan Mode.

The are two reasons Seritag recommend the NXP Apps. First, while you may not have heard of NXP, they are a microchip company similar to Intel, who you probably have. NXP make almost all the NFC chips that go into NFC tags.


Secondly, their Tagwriter and Taginfo Apps for Android are solid, reliable and well featured. We expect their iPhone Apps to develop the same way. The NXP Taginfo for iPhone App is free to download from the App Store.

iPhone Requirements

If you don't have the XS, XS Max, XR, 11 or 11 Pro, then to read NFC tags, you need to have installed iOS 14 or iOS 11 or later and an App.

NFC tag scanning is only available on the iPhone 7 and newer. If you have an older iPhone such as the iPhone 6, unfortunately you do not have the technical ability to read NFC tags.

Tag Requirements

The iPhone will scan a wide variety of NFC tags including NFC Forum Type 2 tags. This includes the popular NTAG®, MIFARE® and ICODE® series chips. Without getting too technical, pretty much any NFC tag you purchase will work but we'd recommend you stick with an NTAG® based tag.

Note that your NFC tags need to be encoded with data, such as a web address (URL), before they will scan. The iPhone will not respond to tags without encoding.

Tag Writing / Encoding

The iPhone is able to read NFC tags, but only properly encoded messages within the main memory space. Technically, this correct encoding follows a universally recognised data structure called NDEF which stands for 'NFC Data Exchange Format'.

With the latest operating system iOS13, the iPhone (7,8,X,Xs,Xr,11,11Pro) is able to also read the tags'a UID (unique ID), encode tags and perform additional tag functions.

If you want to test, for example, opening a web address on a tag, you have three options. The first is to have the web address encoded onto the tags when you purchase them. Seritag can do this for you easily.

The second is to encode the tags in advance with an Android phone with a suitable App (NXP's Tagwriter is recommended).

Third, just get a suitable encoding App for your iPhone. Check our tutorial on how to encode NFC tags with an iPhone to get started.

As mentioned, the tags do need to be encoded with NDEF data which means that blank tags won't do anything. You will get no response at all.

Step 1 : Get Your NFC Tags

If you don't already have some NFC tags then it's easy to buy NFC tags online from Seritag. If you aren't sure which tags to get, then keep it simple and get some mid-sized NTAG213 tags such as our 29mm White NTAG213.

Step 2 : Install The App

Nfc Tag Reader Ios 14

First, download the App from the App Store and install. The App is free to use.

Step 3 : Scan A Tag

Now hold the top area of your phone over an NFC tag. The response should be very quick so if you aren't getting any feedback there's something wrong. You shouldn't need to touch the tag but you will need to be within a few centimetres.

Just a note that normal NFC tags don't work on metal surfaces. So if you have a normal NFC tag and are trying to scan from a metal table then it won't work !

Step 4 : View Contents

You will now be able to see the contents of the tag and be able to launch if desired. It's really as simple as that.

Step 5 : Change Settings

Ios Nfc Tag Reader


It's very likely that NXP will continue to develop the App and add additional features. At the time of writing, there are two settings. The first 'Auto Scan on App launch' means that you don't need to tell the App that you are about to scan an NFC tag. Useful if you scan tags regularly.

Nfc Tag Reader Iphone

The second 'Auto Launch Tag Actions' means that the App will automatically carry out an action associated with the contents of the tag. For example, if the tag contained a web address or URL, then auto launch will open a browser on your phone and display that without you taking any action.

Nfc Tag Reader Ios 14 Meaning

Note that while this is clearly useful for scanning many tags, be aware that if you don't know what is on the tag then you might want to see what's going to be opened before it does it automatically.

Coments are closed

Most Viewed Posts

  • Raspbian Retroarch
  • Retroarch Xbox
  • Microsoft Teams Ios

Scroll to top